In addition to the console booster hardware, you can also use the LagoFast client on your PC to boost your Console, please refer to the following steps:
1. Connect your console (Xbox S) to the router (as shown in the figure)
-
If you’re using Xbox S wired connection (strongly recommended)
1) Connect your Xbox S to the same router as your PC via wired connection
2) Install LagoFast Client on your PC
-
If you’re using Xbox One wireless connection
1) Search for the router WiFi on Xbox S
2) Connect your PC network to the same router as your Xbox S
3) Install LagoFast Client on your PC
Please note:
The optical modem and the set-top box cannot be used as a router to support the console boost (Xbox S), which will cause Connection Failed.
2. Obtain the IP address through LagoFast's PC client
-
Open the LagoFast’s PC client and login your account
-
Enter【Console】tab > 【Xbox】
-
Find the console game you want to boost, click it and select your region
-
The parameters shown in the figure below will be displayed in your client with different values. You need save them to activate the console boost network connection later
Please be careful not to shut down or let your PC sleep during the boost process.
3. Activate the console (Xbox S) boost Internet connection
-
Home > Settings
-
Settings > General > Network settings
-
Network > Advanced settings > IP Settings
-
IPv4 settings > MANUAL
-
Respectively fill in with the IP Address, Subnet Mask, Gateway and DNS you’ve obtained in Step 2
-
After filling in, you will see the updated info
Finally, when it shows Successful in the LagoFast’s PC client, you can start the game!
4. How to disconnect the console (Xbox S) boost?
In the IP Address Settings, set it as AUTOMATIC.
This enables your console to automatically obtain the initial IP address to avoid network anomalies after disconnecting the console boost.
